(2) Custom Logo Cornhole Board Wraps, Regulation Size and Surface

Introducing Custom Logo Cornhole Board Wrap Skins by Graphic Cabin! Printed on durable vinyl with a smooth surface, these cornhole wraps are designed to fit regulation size cornhole boards (24″ wide x 48″ height). Available in multiple attractive designs featuring your logo to enhance your brand experience.

Our custom logo cornhole board wraps are perfect for: Breweries, Wineries, Restaurants, Weddings and Parties, Corporate Events, Fundraisers, Promotional Merchandise, Competitions and Tournaments, and more!

Product Details:

• Laminated for added protection against harsh outdoor elements
• 2 wraps included
• Smooth regulation surface
• Permanent adhesive
• Available in several natural wood stained designed that are pure class!
• Due to slight variations in size and placement, hole is NOT printed or pre-cut on these wraps. See instructions below for cutting recommendations.
• Free logo placement and proof
• Submit your logo here
• Custom design service available

Installation

Tools needed: Squeegee or a plastic card

1. Prepare the Surface: Ensure the cornhole board surface is completely dry, clean and free of any dust, dirt, or grease. A smooth primed, painted, or sealed surface is recommended. 
2. Line up wrap at the top of the board. Do not remove all of the backing at once. 
3. Peel Backing Paper: Carefully peel the backing paper away from the decal. Start at one corner and peel it back slowly, making sure not to touch the adhesive side of the decal.
4. Apply the Decal: Gently apply the exposed adhesive side of the decal to the marked surface. Start from one end and gradually work your way across the decal, smoothing it out as you go. A squeegee or a plastic card can be helpful for this step. Press firmly to eliminate air bubbles and ensure a secure bond.
5. Once the decal is applied, flip the board over and cut out the hole using a sharp blade knife such as an X-Acto Knife

What is the regulation size of a cornhole board?

The regulation size of a cornhole board, as defined by the American Cornhole Association (ACA) and many other cornhole organizations, is as follows:

• The board’s playing surface should measure 2 feet in width and 4 feet in length.
• The top of the board should be positioned 12 inches above the ground at the front and slope downward to approximately 3-4 inches above the ground at the back.
• The hole in the board should have a diameter of 6 inches and be centered 9 inches from the top of the board and 12 inches from each side edge.