Reflective No Parking decal installed on rough pavement

No Parking Floor Sign for Asphalt & Concrete | FloorMetAL™

Price range: $39.00 through $195.00

Take control of your parking areas and clearly mark no-parking zones with a reflective FloorMetAL™ street decal made for rough asphalt and concrete. This adhesive-backed pliable aluminum pavement marking conforms and sticks to textured surfaces to deliver a high-visibility “No Parking” message without paint, stencils or mounting hardware.

Printed on FloorMetAL™ adhesive-backed pliable aluminum decal material
Designed for asphalt, concrete and compatible rough pavement
Reflective, slip-resistant surface rated R12 / BS7976
Available in 18″ × 18″, 24″ × 24″, 36″ × 36″ and 48″ × 48″ sizes
Multi-year use is typical with proper installation and compatible surfaces
Peel-and-stick installation—no drilling, posts or frames
Designed and printed in the USA

Size

18″ x 18″36″ x 36″48″ x 48″24″ x 24″

Clear

SKU: N/A Categories: Floor Graphics, Traffic / Safety Signs, Traffic Signs Tags: Peel & Stick Parking Decals, Street Stickers

Description

No Parking Pavement Marking—Without Paint or Mounted Signs

Clearly identify areas where vehicles should not park with a No Parking floor sign made for rough asphalt and concrete. Installed directly on the pavement, this street decal sticks the restriction where approaching drivers and parking motorists can see it.

The marking is printed on FloorMetAL™ adhesive-backed pliable aluminum, allowing it to conform to textured pavement where standard vinyl may not be suitable. Its reflective, slip-resistant surface provides a clean alternative to painted pavement markings without traffic paint, reusable stencils, overspray or drying time.

Key Benefits

Alternative to painted stencils: Create a consistent No Parking marking without paint equipment, overspray or drying time.
Made for rough pavement: The pliable aluminum construction conforms and sticks to the texture of asphalt and concrete.
Straightforward installation: Apply the adhesive-backed graphic using firm, even pressure from a J-roller or foam roller.
Reflective visibility: The reflective finish helps the message remain noticeable in low-light areas.
Slip-resistant surface: The textured face is rated R12 / BS7976.
Replaceable marking: Update worn or relocated no-parking zones without grinding away painted graphics.

Product Specifications

Message: No Parking
Material: FloorMetAL™ adhesive-backed pliable aluminum
Product type: Parking lot floor sign / Street decal / pavement marking
Sizes: 18″ × 18″, 24″ × 24″, 36″ × 36″ and 48″ × 48″
Printing: UV-cured ink
Recyclable: Yes (PVC-free)
Recommended surfaces: Asphalt, concrete, brick, tile and other compatible rough surfaces
Finish: Reflective, textured surface
Slip resistance: R12 / BS7976
Traffic: Designed for pedestrian and moderate vehicle traffic
Installation: Pressure-sensitive adhesive applied with a J-roller or foam roller
Outdoor performance: Multi-year use is typical with proper installation and compatible surfaces

Additional information

Size	18" x 18", 36" x 36", 48" x 48", 24" x 24"
Brand	Graphic Cabin
Surface	Concrete & Asphalt Floor Surfaces, Rough Walls (Brick / Concrete / Stucco)
Environment	Outdoor
Installation	Semi-Permanent
Substrate	FloorMetAL Pliable Aluminum

Reviews

There are no reviews yet.

Be the first to review “No Parking Floor Sign for Asphalt & Concrete | FloorMetAL™”

You must be logged in to post a review.

Industrial-grade decals

Why FloorMetAL™

Goes where traditional signs can’t

Sticks and conforms to rough, uneven surfaces like asphalt, concrete, brick, curbs, and parking blocks — perfect for drive lanes and curb faces where posts or stencil paint are hard to install or keep clean.

Faster to install, easier to maintain

No stencils, overspray, curing downtime, or repaint cycle for most applications. Updates and replacements are faster than traditional signs.

Slip‑resistant, safety‑focused surface

Designed for outdoor and public-facing environments where traction and visibility matter most. Ideal for walkways, entries, pool decks, and industrial areas.

Made for demanding outdoor use

Designed for parking, traffic, curb, and facility signage exposed to weather, moisture, and daily wear. On compatible surfaces with proper installation and edge sealing, FloorMetAL™ decals outperform standard vinyl and paint.*

Quick & Easy Install

FloorMetAL™ Installation

Most FloorMetAL™ installs are completed without a professional installer. Surface prep, dry conditions, firm rolling pressure, and sealing are the biggest factors in long-term performance.

The Best Way to Mark Visitor Parking Spaces for Safety and Compliance

Clean Thoroughly

Remove all loose debris, dirt, oil, and grime. Power washing is ideal; if that is not possible, use a stiff brush, broom, or shop vac.

Let It Fully Dry

Apply only to a completely dry surface. Any trapped moisture can reduce adhesion and shorten the life of the decal.

Apply and Roll Firmly

Remove backing, position the decal and use a J-roller or foam roller to apply firm, even pressure across the full graphic. Finish by pressing edges and textured areas by hand.

Outdoor Floor Decals for Pavement: Industrial-Grade Solutions for Safety and Visibility

Seal for Long-Term Outdoor Use

For longer-term outdoor use, brush on a compatible waterproof coating over the surface and along the edges after installation.**

*Outdoor durability varies by application. On compatible surfaces, FloorMetAL™ can deliver up to multiple years in favorable conditions, especially on curbs, parking blocks, and other lower-impact surfaces. On horizontal asphalt or concrete in exposed traffic areas, actual life will vary based on climate, snow plow / vehicle / equipment impact, moisture, UV exposure, surface texture, traffic, and whether the decal is sealed after installation.

**An exterior‑grade clear waterproof edge sealer or coating can help reduce moisture intrusion and edge wear on rough outdoor surfaces. Always follow the manufacturer’s instructions and confirm that any sealer or coating you choose is compatible with both the substrate and the decal surface.

Get Better Results From Your FloorMetAL Decal

Download the Printable Life Extension Guide Read the FloorMetAL Asphalt Installation Guide

FloorMetAL™ Frequently Asked Questions

FloorMetAL™ is designed for rough and textured surfaces such as broom‑finished concrete, asphalt, brick, stone, and aggregate where standard vinyl struggles to maintain reliable adhesion. It can also perform well on many epoxy‑coated concrete floors and pool decks when properly prepared. For smooth, sealed concrete, tile, or polished floors, GGGrips™ permanent vinyl or indoor removable vinyl may be more appropriate. If you’re unsure, send us a photo of your surface and we’ll recommend the right material

Yes. FloorMetAL™ carries an R12 / BS7976 slip-resistance rating and is also flame resistant and PVC-free. The anti‑slip texture is built into the material itself and is not a separate overlaminate. For projects that must meet a specific test standard, contact us with your requirements so we can confirm suitability.

On compatible surfaces with proper installation, FloorMetAL™ can deliver multi‑year outdoor performance (up to 5+ years), especially on curbs, parking blocks, and lower‑impact pedestrian areas. Actual lifespan will vary based on surface condition, traffic level, climate, snow‑plow/heavy vehicle activity, moisture, UV exposure, and whether the edges are sealed to reduce water intrusion. For demanding asphalt or high‑traffic applications, follow the installation guide carefully and consider using a compatible waterproof edge sealer.

Standard vinyl is rigid enough that on rough or textured surfaces, it can only contact the high points of the surface profile — leaving air pockets along the texture that allow moisture and debris to undermine adhesion over time. Coated soft aluminum is pliable enough to physically conform to surface irregularities, making full contact across the entire adhesion area. This conformability is what gives FloorMetAL™ its superior adhesion life on rough surfaces — a performance characteristic no vinyl product can replicate.

Yes. FloorMetAL™ can be produced in OSHA‑style safety colors and layout formats suitable for safety and traffic marking programs. FloorMetAL™ products themselves are not “pre‑certified” OSHA‑compliant; overall compliance depends on correct color selection, placement, sizing, and how markings are integrated into your facility safety plan. We recommend coordinating with your safety officer or consultant when specifying floor graphics for regulated environments.

FloorMetAL™ is typically the better choice for rough, broom‑finished, or aggregate concrete, and where you may need to remove or update graphics in the future. GGGrips™ permanent vinyl is a stronger fit for flat or lightly textured outdoor concrete that sees heavy, ongoing traffic — including vehicles and forklifts — and where maximum long‑term adhesion is the priority. If you’re unsure, send us a photo and a brief description of the traffic level, and we’ll recommend the right material.

Most custom FloorMetAL™ orders ship in approximately 5–7 business days after artwork approval. Rush options may be available depending on project scope and current production schedule — contact us before placing your order if you have a firm deadline. All FloorMetAL™ graphics are designed and printed in the USA.

FloorMetAL™ uses a removable pressure‑sensitive adhesive designed to release cleanly from most compatible concrete and asphalt surfaces when removed correctly. This makes it practical for seasonal signage, events, temporary parking designations, and other applications where messaging may need to change. In some cases minor residue or shading can remain, but removal is generally much less invasive than painted markings that often require grinding or chemical stripping.

We can often ship FloorMetAL™ products to Canada, Puerto Rico, and selected international destinations. Because rates, duties, and transit times vary by region, please contact us for availability and a custom shipping quote before placing orders outside the continental United States.