No Outlet Floor Sign installed on pavement

No Outlet Pavement Decal for Asphalt & Concrete | FloorMetAL™

Price range: $39.00 through $195.00

Alert drivers that a road or internal drive has no alternate exit with a reflective FloorMetAL™ No Outlet pavement decal made for rough asphalt and concrete. This slip-resistant adhesive-backed pavement marking delivers a clear ground-level message without paint, messy stencils or drying time.

Printed on FloorMetAL™ adhesive-backed pliable aluminum decal material
Designed for asphalt, concrete and compatible rough pavement
Reflective, slip-resistant surface rated R12 / BS7976
Available in 18″ × 18″, 24″ × 24″, 36″ × 36″ and 48″ × 48″ sizes
Multi-year use is typical with proper installation and compatible surfaces
Peel-and-stick installation—no drilling, posts or frames
Designed and printed in the USA

Size

18″ x 18″36″ x 36″48″ x 48″24″ x 24″

Clear

SKU: N/A Categories: Floor Graphics, Traffic / Safety Signs, Traffic Signs Tags: Peel & Stick Parking Decals, Street Stickers

Description

No Outlet Pavement Marking—Without Paint or Messy Stencils

Give drivers advance notice that a private road, internal drive or parking route does not provide another way out. This No Outlet street level floor decal places the message directly on the pavement, creating an additional visual cue before drivers enter the route.

Printed on FloorMetAL™ adhesive-backed pliable aluminum, the floor sign conforms to rough asphalt and concrete where standard vinyl graphics may not perform reliably. Its reflective, textured surface provides an efficient alternative to painting No Outlet messages with traffic paint, reusable stencils and specialized application equipment.

Applications & Professional Uses

Apartment Communities & HOA Properties: Mark private roads and residential drives that return vehicles to the same entrance.
Commercial & Corporate Campuses: Identify access roads, parking-lot branches and internal routes without an alternate exit.
Industrial & Manufacturing Facilities: Mark service roads, secured yards and internal vehicle routes that require drivers to return along the same path.
Schools & Universities: Reinforce No Outlet messaging on campus roads, staff parking routes and maintenance drives.
Healthcare Facilities: Identify internal campus drives and parking routes that do not connect to another exit.
Municipal & Institutional Properties: Add a pavement-level message at the entrance to facility roads or road networks with a single access point.
Parking Lots & Garages: Alert drivers before entering parking sections that require them to turn around or return through the same route.

Product Specifications

Message: NO OUTLET
Material: FloorMetAL™ adhesive-backed pliable aluminum
Product type: Floor sign / Street decal / Pavement marking
Sizes: 18″ × 18″, 24″ × 24″, 36″ × 36″ and 48″ × 48″
Finish: Reflective, textured surface
Slip resistance: R12 / BS7976
Recyclable: Yes (PVC-free)
Primary surfaces: Asphalt, sealed or unsealed concrete and compatible rough pavement
Secondary placement: Compatible rough concrete, brick and masonry walls
Environment: Outdoor
Installation: Semi-permanent, pressure-sensitive application
Recommended use: Private roads, internal drives, parking areas and facility traffic routes
Item number: GC-NOSS
Production: Designed and printed in the USA
Outdoor performance: Multi-year use is typical with proper installation and compatible surfaces

Choose the Right Message

Use No Outlet when a road or interconnected road network has no alternate exit. Use Dead End for a single street or drive that terminates, and use Private Road – No Thru Traffic when through traffic is discouraged but the road may continue beyond the property.

Additional information

Size	18" x 18", 36" x 36", 48" x 48", 24" x 24"
Surface	Brick & Masonry, Concrete & Asphalt Floor Surfaces, Rough Walls (Brick / Concrete / Stucco)
Brand	Graphic Cabin
Environment	Outdoor
Installation	Semi-Permanent
Substrate	FloorMetAL Pliable Aluminum

Reviews

There are no reviews yet.

Be the first to review “No Outlet Pavement Decal for Asphalt & Concrete | FloorMetAL™”

You must be logged in to post a review.

Industrial-grade decals

Why FloorMetAL™

Goes where traditional signs can’t

Sticks and conforms to rough, uneven surfaces like asphalt, concrete, brick, curbs, and parking blocks — perfect for drive lanes and curb faces where posts or stencil paint are hard to install or keep clean.

Faster to install, easier to maintain

No stencils, overspray, curing downtime, or repaint cycle for most applications. Updates and replacements are faster than traditional signs.

Slip‑resistant, safety‑focused surface

Designed for outdoor and public-facing environments where traction and visibility matter most. Ideal for walkways, entries, pool decks, and industrial areas.

Made for demanding outdoor use

Designed for parking, traffic, curb, and facility signage exposed to weather, moisture, and daily wear. On compatible surfaces with proper installation and edge sealing, FloorMetAL™ decals outperform standard vinyl and paint.*

Quick & Easy Install

FloorMetAL™ Installation

Most FloorMetAL™ installs are completed without a professional installer. Surface prep, dry conditions, firm rolling pressure, and sealing are the biggest factors in long-term performance.

The Best Way to Mark Visitor Parking Spaces for Safety and Compliance

Clean Thoroughly

Remove all loose debris, dirt, oil, and grime. Power washing is ideal; if that is not possible, use a stiff brush, broom, or shop vac.

Let It Fully Dry

Apply only to a completely dry surface. Any trapped moisture can reduce adhesion and shorten the life of the decal.

Apply and Roll Firmly

Remove backing, position the decal and use a J-roller or foam roller to apply firm, even pressure across the full graphic. Finish by pressing edges and textured areas by hand.

Outdoor Floor Decals for Pavement: Industrial-Grade Solutions for Safety and Visibility

Seal for Long-Term Outdoor Use

For longer-term outdoor use, brush on a compatible waterproof coating over the surface and along the edges after installation.**

*Outdoor durability varies by application. On compatible surfaces, FloorMetAL™ can deliver up to multiple years in favorable conditions, especially on curbs, parking blocks, and other lower-impact surfaces. On horizontal asphalt or concrete in exposed traffic areas, actual life will vary based on climate, snow plow / vehicle / equipment impact, moisture, UV exposure, surface texture, traffic, and whether the decal is sealed after installation.

**An exterior‑grade clear waterproof edge sealer or coating can help reduce moisture intrusion and edge wear on rough outdoor surfaces. Always follow the manufacturer’s instructions and confirm that any sealer or coating you choose is compatible with both the substrate and the decal surface.

Get Better Results From Your FloorMetAL Decal

Download the Printable Life Extension Guide Read the FloorMetAL Asphalt Installation Guide

FloorMetAL™ Frequently Asked Questions

FloorMetAL™ is designed for rough and textured surfaces such as broom‑finished concrete, asphalt, brick, stone, and aggregate where standard vinyl struggles to maintain reliable adhesion. It can also perform well on many epoxy‑coated concrete floors and pool decks when properly prepared. For smooth, sealed concrete, tile, or polished floors, GGGrips™ permanent vinyl or indoor removable vinyl may be more appropriate. If you’re unsure, send us a photo of your surface and we’ll recommend the right material

Yes. FloorMetAL™ carries an R12 / BS7976 slip-resistance rating and is also flame resistant and PVC-free. The anti‑slip texture is built into the material itself and is not a separate overlaminate. For projects that must meet a specific test standard, contact us with your requirements so we can confirm suitability.

On compatible surfaces with proper installation, FloorMetAL™ can deliver multi‑year outdoor performance (up to 5+ years), especially on curbs, parking blocks, and lower‑impact pedestrian areas. Actual lifespan will vary based on surface condition, traffic level, climate, snow‑plow/heavy vehicle activity, moisture, UV exposure, and whether the edges are sealed to reduce water intrusion. For demanding asphalt or high‑traffic applications, follow the installation guide carefully and consider using a compatible waterproof edge sealer.

Standard vinyl is rigid enough that on rough or textured surfaces, it can only contact the high points of the surface profile — leaving air pockets along the texture that allow moisture and debris to undermine adhesion over time. Coated soft aluminum is pliable enough to physically conform to surface irregularities, making full contact across the entire adhesion area. This conformability is what gives FloorMetAL™ its superior adhesion life on rough surfaces — a performance characteristic no vinyl product can replicate.

Yes. FloorMetAL™ can be produced in OSHA‑style safety colors and layout formats suitable for safety and traffic marking programs. FloorMetAL™ products themselves are not “pre‑certified” OSHA‑compliant; overall compliance depends on correct color selection, placement, sizing, and how markings are integrated into your facility safety plan. We recommend coordinating with your safety officer or consultant when specifying floor graphics for regulated environments.

FloorMetAL™ is typically the better choice for rough, broom‑finished, or aggregate concrete, and where you may need to remove or update graphics in the future. GGGrips™ permanent vinyl is a stronger fit for flat or lightly textured outdoor concrete that sees heavy, ongoing traffic — including vehicles and forklifts — and where maximum long‑term adhesion is the priority. If you’re unsure, send us a photo and a brief description of the traffic level, and we’ll recommend the right material.

Most custom FloorMetAL™ orders ship in approximately 5–7 business days after artwork approval. Rush options may be available depending on project scope and current production schedule — contact us before placing your order if you have a firm deadline. All FloorMetAL™ graphics are designed and printed in the USA.

FloorMetAL™ uses a removable pressure‑sensitive adhesive designed to release cleanly from most compatible concrete and asphalt surfaces when removed correctly. This makes it practical for seasonal signage, events, temporary parking designations, and other applications where messaging may need to change. In some cases minor residue or shading can remain, but removal is generally much less invasive than painted markings that often require grinding or chemical stripping.

We can often ship FloorMetAL™ products to Canada, Puerto Rico, and selected international destinations. Because rates, duties, and transit times vary by region, please contact us for availability and a custom shipping quote before placing orders outside the continental United States.