Address & Parking Number Decals (0–9) for Concrete & Asphalt | FloorMetAL Pliable Aluminum

Price range: $8.99 through $109.99

Heavy-duty pliable aluminum number decals (0–9) for concrete curb addresses and asphalt parking spaces. UV-printed, reflective, slip-resistant. No stencils needed. USA-made.

Available as single digits, 5-packs, and full 0–9 sets. See “How to Order” below before adding to cart.

$8.99
$13.99
$39.99
$74.99
$59.99
$109.99

Description

Address and parking number decals for asphalt and concrete, UV-printed on Graphic Cabin’s proprietary FloorMetAL Pliable Aluminum, are the maintenance-free alternative to painted stencils, thermoplastic markings, and traditional curb lettering. Whether you’re marking a residential curb address, identifying numbered parking spaces in a commercial lot, or replacing faded painted numbers in an HOA community, these single-number decals give you precise, batch-printable identification that lasts up to 5 years outdoors — without a paint crew.

Choose Your Format

  • Single Digit — Order exactly the digits you need, in the quantity you need them. Perfect for custom address combinations, replacement decals, or small jobs. Available in both sizes.
  • 5-Pack (Same Digit) — Five identical digit decals. Ideal for lot managers numbering multiple spaces with the same digit, or property managers standardizing a full lot at once.
  • Full Number Set (0–9) — One of every digit, zero through nine. The complete kit for numbering a new parking lot, assigning unit addresses, or replacing a full sequence. No ordering math required.

How to Order

  • Single Digits — Set quantity to the total number of decals you need. In the Order Notes field at checkout, list each digit and how many of each.
    Example: Digit 7 (Qty: 2), Digit 1 (Qty: 3)
  • 5-Pack (Same Digit) — Set quantity to 1. In Order Notes, tell us which digit you need 5 of.
    Example: 5-Pack of Digit 4
  • Full Set (0–9) — No order note needed. You’ll receive one of each digit (0–9) in your chosen size.

✅ We’ll confirm your digit combination before we ship

🔤 Need letters (A–Z)? Letters are currently available as custom orders only — contact us for a quote.

Why FloorMetAL™ Outlasts Paint and Stencils

Painted curb numbers and stenciled parking spaces fade, crack, and wash out — requiring re-application seasonally or after every lot reseal. FloorMetAL™ number decals install once and last up to 5 years outdoors, with no paint crew, no equipment, and no permits required in most jurisdictions.

  • Reflective surface for day and night visibility — meets 911 emergency address guidelines
  • Certified slip-resistant — R12 BS7976 anti-slip rating
  • Conforms to rough, uneven asphalt, concrete, brick, and tile
  • PVC/vinyl-free, washable, and resistant to vehicle fluids and chemicals
  • Clean removal — no residue left behind

Ideal for:

  • Property Management & HOA Boards — Mark resident unit numbers on curbs, assign numbered parking spaces to tenants, and enforce designated spots without ongoing maintenance
  • Facility & Plant Managers — Number loading dock bays, warehouse floor zones, or service vehicle spaces for clear operational flow
  • Municipal & Public Works Departments — Durable alternative to painted curb address numbers in residential neighborhoods and public parking facilities
  • Parking Lot Operators & Commercial Centers — Clearly number individual spaces for reserved, paid, or permit parking programs
  • School Districts & Universities — Mark numbered faculty, staff, or student permit spaces with long-lasting, slip-safe identification
  • Hotels, Apartments & Resorts — Assign numbered spots to guests, residents, or valet positions in a professional, maintenance-free format

Additional information

Surface

Brick & Masonry, Concrete & Asphalt Floor Surfaces, Rough Walls (Brick / Concrete / Stucco)

Environment

Outdoor

Installation

Semi-Permanent

Brand

Graphic Cabin

Substrate

FloorMetAL Pliable Aluminum

Size

3.5" x 4", 5" x 7"

Number

1, 2, 3, 4, 5, 6, 7, 8, 9, 0

Reviews

There are no reviews yet.

Be the first to review “Address & Parking Number Decals (0–9) for Concrete & Asphalt | FloorMetAL Pliable Aluminum”

Industrial-grade Durable decals

Why FloorMetAL™

Goes where traditional signs can’t

Conforms to rough, uneven surfaces like asphalt, concrete, brick, curbs, and parking blocks — perfect for drive lanes and curb faces where posts or stencil paint are hard to install or keep clean.

Faster to install, easier to maintain

No stencils, overspray, curing downtime, or repaint cycle for most applications. Updates and replacements are faster than traditional signs.

Slip‑resistant, safety‑focused surface

Designed for outdoor and public-facing environments where traction and visibility matter most. Ideal for walkways, entries, pool decks, and industrial areas.

Made for demanding outdoor use

Designed for parking, traffic, curb, and facility signage exposed to weather, moisture, and daily wear. On compatible surfaces with proper installation and edge sealing, FloorMetAL™ outperforms standard vinyl and paint.*


Quick & Easy Install

FloorMetAL™ Installation

Most FloorMetAL™ installs are completed without a professional installer. Surface prep, dry conditions, firm rolling pressure, and sealing are the biggest factors in long-term performance.

The Best Way to Mark Visitor Parking Spaces for Safety and Compliance
Clean Thoroughly

Remove all loose debris, dirt, oil, and grime. Power washing is ideal; if that is not possible, use a stiff brush, broom, or shop vac.

Let It Fully Dry

Apply only to a completely dry surface. Any trapped moisture can reduce adhesion and shorten the life of the decal.

J-Roller-Decal-Install
Apply and Roll Firmly

Position the decal and use a J-roller or foam roller to apply firm, even pressure across the full graphic. Finish by pressing edges and textured areas by hand.

Outdoor Floor Decals for Pavement: Industrial-Grade Solutions for Safety and Visibility
Seal for Long-Term Outdoor Use

For longer-term outdoor use, brush on a compatible waterproof coating over the surface and along the edges after installation.**

*Outdoor durability varies by application. On compatible surfaces, FloorMetAL™ can deliver up to 5+ years in favorable conditions, especially on curbs, parking blocks, and other lower-impact surfaces. On horizontal asphalt or concrete in exposed traffic areas, actual life will vary based on climate, snow plow / vehicle / equipment impact, moisture, UV exposure, surface texture, traffic, and whether the decal is sealed after installation.

**An exterior‑grade clear waterproof edge sealer or coating can help reduce moisture intrusion and edge wear on rough outdoor surfaces. Always follow the manufacturer’s instructions and confirm that any sealer or coating you choose is compatible with both the substrate and the decal surface.


FloorMetAL™ Frequently Asked Questions

FloorMetAL™ is designed for rough and textured surfaces such as broom‑finished concrete, asphalt, brick, stone, and aggregate where standard vinyl struggles to maintain reliable adhesion. It can also perform well on many epoxy‑coated concrete floors and pool decks when properly prepared. For smooth, sealed concrete, tile, or polished floors, GGGrips™ permanent vinyl or indoor removable vinyl may be more appropriate. If you’re unsure, send us a photo of your surface and we’ll recommend the right material

Yes. FloorMetAL™ carries an R12 / BS7976 slip-resistance rating and is also flame resistant and PVC-free. The anti‑slip texture is built into the material itself and is not a separate overlaminate. For projects that must meet a specific test standard, contact us with your requirements so we can confirm suitability.

On compatible surfaces with proper installation, FloorMetAL™ can deliver multi‑year outdoor performance (up to 5+ years), especially on curbs, parking blocks, and lower‑impact pedestrian areas. Actual lifespan will vary based on surface condition, traffic level, climate, snow‑plow/heavy vehicle activity, moisture, UV exposure, and whether the edges are sealed to reduce water intrusion. For demanding asphalt or high‑traffic applications, follow the installation guide carefully and consider using a compatible waterproof edge sealer.

Standard vinyl is rigid enough that on rough or textured surfaces, it can only contact the high points of the surface profile — leaving air pockets along the texture that allow moisture and debris to undermine adhesion over time. Coated soft aluminum is pliable enough to physically conform to surface irregularities, making full contact across the entire adhesion area. This conformability is what gives FloorMetAL™ its superior adhesion life on rough surfaces — a performance characteristic no vinyl product can replicate.

Yes. FloorMetAL™ can be produced in OSHA‑style safety colors and layout formats suitable for safety and traffic marking programs. FloorMetAL™ products themselves are not “pre‑certified” OSHA‑compliant; overall compliance depends on correct color selection, placement, sizing, and how markings are integrated into your facility safety plan. We recommend coordinating with your safety officer or consultant when specifying floor graphics for regulated environments.

FloorMetAL™ is typically the better choice for rough, broom‑finished, or aggregate concrete, and where you may need to remove or update graphics in the future. GGGrips™ permanent vinyl is a stronger fit for flat or lightly textured outdoor concrete that sees heavy, ongoing traffic — including vehicles and forklifts — and where maximum long‑term adhesion is the priority. If you’re unsure, send us a photo and a brief description of the traffic level, and we’ll recommend the right material.

Most custom FloorMetAL™ orders ship in approximately 5–7 business days after artwork approval. Rush options may be available depending on project scope and current production schedule — contact us before placing your order if you have a firm deadline. All FloorMetAL™ graphics are designed and printed in the USA.

FloorMetAL™ is the better choice when the concrete surface is rough, broom-finished, or aggregate — situations where the pliable aluminum substrate can conform to the surface profile and vinyl cannot. It also removes cleanly, making it preferable when signage will need to be updated. GGGrips™ is the better choice for flat or lightly textured outdoor concrete where you need the absolute strongest permanent adhesion and the graphic will face vehicle or forklift traffic. If you’re unsure, send us a photo and we’ll recommend the right material for your project.

FloorMetAL™ uses a removable pressure‑sensitive adhesive designed to release cleanly from most compatible concrete and asphalt surfaces when removed correctly. This makes it practical for seasonal signage, events, temporary parking designations, and other applications where messaging may need to change. In some cases minor residue or shading can remain, but removal is generally much less invasive than painted markings that often require grinding or chemical stripping.

We can often ship FloorMetAL™ products to Canada, Puerto Rico, and selected international destinations. Because rates, duties, and transit times vary by region, please contact us for availability and a custom shipping quote before placing orders outside the continental United States.